Various Playback Modes - Sony DSR-PD170 Quick Start Manual

Ccd minidv camcorder
Hide thumbs Also See for DSR-PD170:
Table of Contents

Advertisement

Playing back a tape

Various playback modes

To operate video control buttons, set the POWER switch to VCR.
To view a still picture (playback pause)
Press X during playback. To resume normal playback, press N or X.
To advance the tape
Press M in stop mode. To resume normal playback, press N.
To rewind the tape
Press m in stop mode. To resume normal playback, press N.
To change the playback direction
Press
on the Remote Commander during playback to reverse the playback direction.
To resume normal playback, press N.
To locate a scene monitoring the picture (picture search)
Keep pressing m or M during playback. To resume normal playback, release the button.
To monitor the picture at high-speed while advancing or
rewinding the tape (skip scan)
Keep pressing m while rewinding or M while advancing the tape. To resume
rewinding or advancing, release the button.
To view the picture at slow speed (slow playback)
Press y during playback. For slow playback in the reverse direction, press
on the
Remote Commander, then press y. To resume normal playback, press N.
To view the picture at double speed
Press ×2 on the Remote Commander during playback. For double speed playback in the
, then press ×2 on the Remote Commander. To resume
reverse direction, press
normal playback, press N.
To view the picture frame-by-frame
Press C on the Remote Commander in playback pause mode. For frame-by-frame
playback in the reverse direction, press c. To resume normal playback, press N.
To search the last scene recorded (END SEARCH)
Press END SEARCH in stop mode. The last five seconds of the recorded portion plays
back and stops.
In various playback modes
•Sound is muted.
•The previous picture may remain as a mosaic image during playback.
When the playback pause mode lasts for five minutes
Your camcorder automatically enters the stop mode. To resume playback, press N.
Slow playback
Slow playback can be performed smoothly on your camcorder, however, this function
does not work for a signal output through the
DV Interface.
When you play back a tape in reverse
Horizontal noise may appear at the center, or the top and bottom of the screen. This is
not a malfunction.
14

Advertisement

Table of Contents
loading

Table of Contents