International Character Sets - Epson DFX-5000 User Manual

but you can select NLQ Sans Serif with the software command
ESC k. See the Command Summary in Chapter 8.
Draft mode produces lower-resolution characters at a fast printing
speed. The DFX-5000 has two printing speeds for draft mode,
draft and high-speed draft. These printing speeds are controlled
by DIP switch 2-2 (see the next page). When you select draft
mode, the printer checks DIP switch 2-2 to see which printing
speed to use.

International character sets

International character sets contain the characters and symbols
used in other languages. To select the desired international
character set, set switches 1-6,1-7, and 1-8 according to the DIP
switch table on page 3-11. The character set you select then
becomes the default character set. The following table shows the
characters that differ in each international character set.
Infernational character sets
Using the Printer
3-16