Epson DFX-5000 User Manual page 164

Vertical tabbing:
VT
Format:
ASCII code: VT
Decimal:
Hexadecimal: 0B
Comments:
Advances the paper to the next tab setting in the channel
selected by ESC /. If no channel has been selected, channel 0 is
used. If no vertical tabs have been selected, the paper advances
one line.
ESC B
Format:
A S C I I c o d e : E S C B n 1 n 2 . . . 0
Decimal:
H e x a d e c i m a l : 1 B 4 2 n 1 n 2 . . . 0 0
Comments:
Sets up to 16 vertical tabs in the current line spacing. Tab
settings are not affected by subsequent changes in line spacing.
The tab settings are entered as n1, n2, etc., all from 1 to 255, in
ascending order. The 0 character indicates the end of the
command. All settings are stored in channel 0 (see ESC b).
ESC B 0 clears the tab settings.
11
2 7 6 6
n 1
Set Vertical Tabs
0
n 2 . . .
Command Summary
Tab Vertically
8-17