Using The Pull Tractor With Front Tractor - Epson DFX-5000 User Manual

6. Tilt the pull tractor back until its rear latches click into place
over the printer's rear mounting pins.
7. Close the printer's top cover.
Using the pull tractor with the front tractor
If you are using labels, or multi-part forms with more
parts including the original, you should use the pull tractor with
the printer's built-in front tractor.
You can switch between the front and rear tractors at any time
when you are using the pull tractor. Just press the
button and then use
additional distance to the pull tractor. (Labels require special
handling. See the section on using labels in Chapter 2.)
The automatic tear-off feature does not work when the pull tractor
is installed. To tear off documents, press the
advance the paper to a point where it can be torn off.
the FORM FEED
Using the Printer Options
FRONT/REAR
button to feed the paper the
FORM FEED
than
four
button to
6-5