Character Tables - Epson DFX-5000 User Manual

Character Tables

The character tables on the next two pages are selected by setting
DIP switch 1-3 or using the ESC t software command. For the
Epson Extended Graphics character table, the ESC 6 and ESC 7
software commands let you select whether hex codes 80 to 9F are
characters (ESC 6) or control codes (ESC 7).
In the tables the first digit of each hex code is in the top row and
the second digit is in the first column. The binary digits are in the
second row and second column, and the decimal codes are in the
rectangle next to the character. For example, for an uppercase A,
the hex code is 41, the binary code is 01000001, and the decimal
code is 65.
A-6
Reference Tables