Sony Handycam HDR-HC3 Operating Manual page 18

St÷p2: ¢har_ie_ the battery pack {¢+etieu+_}
18
DV format pictures
NP-FP50 85 95
NP-FP60
135 145
/supplicd)
NP+FP70 185 200
NP+FP71 220 235
NP+FfX)0 335 355
* When the LCD backlight turns on.
On the battery pack
• Bel_)re changing tile battery pack. slMe tile
POWER switch to OFF/CHG).
• The CHG (charge) lamp flashes during
charging, or Battc U Inlk) (p. 34) will not be
correctly displayed under the lollowing
conditions.
Tile battcl T pack is not attached corrcctly.
Tile battc U pack is damaged.
Tile baaery pack is worn-out (For Battery
Inlk) only).
• The power will not be supplied liom the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord is disconnected fiom the wall outlet.
• When aaacbing an optional video light, it is
recommended thai you use a NP-FP60. NP-
FP70. NP-FP71 or NP-FIX)O battery pack.
On the charging/recording/playback time
• Times measured with the camcorder at 25 %"
(77 OF)(10 to 30 %" (50 OF to 86 OF) is
mconnnended).
• The recording and playback lime will be shorter
when yell use your camcorder in low
tenlperalures.
• The recording and playback lhllc will be shorter
depending on file conddions under which you
use yollr camcorder.
On the AC Adaptor
• U_ tile nearby wall outlet when using the AC
Adaptor. Disconnect tile AC Adaptor h'om the
wall outlet immedialcly if any mallunction
Occurs while using your calllcorder.
• Do not use tile AC Adaptor placed ill a nan-ow
space, such as between a wall and flmliturc.
• Do not short-circuit tile DC plug of tile AC
Adaptor or battery terminal with any metallic
objects, This may cause a malflmction.
PRECAUTION
• Even if your camcorder is turned oil. AC power
/house current) is still supplied to it while
connected to the wall out]el via the AC Adaptor.