Sony Handycam HDR-HC3 Operating Manual page 104

TrssblsshsstisS {Csstisssd)
Pictures from connected devices cannot be zoomed.
• You cannot zoom pictures from connected devices on your camcordcr (p. 34).
Time code and other information appear on the display of the connected
device.
• Set [DISP OUTPUT] to [LCD PANEL] x_hile connected x_ithan A/V connecting cable
(p. 69).
You cannot dub correctly using the A/V connecting cable.
• You cannot input externally from a device connected _ith the A/V connecting cable.
• The A/V connecting cable is not connected properly.
Make sure that the A/V connecting cable is connected to the input jack of the other device for
dubbing a picture from your camcorder.
When connected using an i.LINK cable, no picture appears on the monitor
screen during dubbing.
• Set [VCR HDV/DV] on the }_)_ (STANDARD SET menu according to the requirements of
the connected device (p. 65).
You cannot add sound to the recorded tape.
• You cannot addsound to the recordedtape on this unit.
You cannot dub correctly using the HDMI cable.
• You cannot dub pictures using the HDMI cable.
New sound added to a recorded tape on another camcorder is not heard. DV
• At[just 1_{_ AUDIO MIX] from the [STI] (original sound) side until the sound is heard
appropriately (p. 66).
Still pictures cannot be dubbed from a tape to a "Memory Stick Duo."
• You cannot record or a distorted picture may bc recorded if the tape has been used repeatedly
for recording.
104