TrssNsshsstisS/gsstisssS}
"---"
is displayed
on the screen.
• The tape you are playing _as recorded
_vithout setting the date and time.
• A blank section on the tape is being played.
• The data code on a tape with a scratch or noise cannot be read.
Noises
appear
and
_
or _[_
is displayed
on the screen.
• The tape was recorded
in a TV color system other than that of your camcorder
(NTSC).
This
is not a malflmction
(p. I I 1).
Date Search
does
not work
correctly.
• Bc sure to record more than 2 minutes aflcr the date changed.
It"one day' s recording
is too
short, your camcorder
may not iccurately
find the point where the recording
<late changes.
• There is a bhmk section between
recorded
sections of the tape. This is not a malfimction.
No picture
appears
during
[END
SEARCH]
or Rec Review.
• The tape _as recorded
in both HDV and DV formats. This is not a malfunction.
You
cannot
view
the picture
on the TV connected
with the i.LINK
cable.
• You cannot vicv_ the picture in the HD (high definition)
qualit 3 on the TV _hich
is not
compatible
with the HDVI080i
specification
(p. 42). Reli:r to the instruction
manuals
supplied
with your TV.
• Down convert the pictures
recorded
in HDV format and play back in DV format (SD image
quality)
(p. 68).
• Play back pictures using another connecting
cable (p. 42).
You cannot view the picture or hear the sound on the TV connected with the
component
video cable.
• Set [COMPONENT] on the _
(STANDARD SET) menu according to Ibe requirements of
the connected device (p. 67).
• When you arc using the component video cable, make sure the red and white plugs of the
A/V connecting cable are connected (p. 42).
You
cannot
view
the picture
or hear
the sound
on the TV connected
with the
HDMI
cable.
• Pictures
in the HDV format are not output from the HDMI OUT.jack,
if copyright
protection
signals are recorded
in the pictures.
• DV format pictures
input to the camcoNer
via i.LINK cable (p. 77) cannot be output.
• This occurs
if you record on a tape in both HDV and DV formats. Disconnect
and connect
the
HDMI cable, or slide the POWER
switch to turn on your camcorder
again.
100