Cable Box Connections - Sony FD Trinitron WEGA KV-27FS16 Operating Instructions Manual

Cable Box Connections
Some pay cable TV systems to use scrambled or encoded signals that
require a cable box to view all channels.
Cable Box
Cable
Cable Box
1
Connect the coaxial cable from your cable service to the IN jack on
your cable box.
2 Connect a coaxial cable (not supplied) from the OUT jack on yol
cable box to the VHF/UHF jack on your TV.
If you will be controlling all channel selection through your cable box, you
should consider using the Channel Fix feature, (see page 26).
Cable Box and Cable
For this set up, you can switch between scramble channels (through you
cable box), and normal (CATV) channels by using the _:_ button.
Cable Box (Rear of TV)
IN (:_D=_(D --_
OUT TO CONVERTER
7B-ohm coaxial cable (not supplied) I (Signal)
VHF/UHF
CAW cable (unscrambled channels)
If you are connecting a cable box through the AUX input and would like to
switch between the AUX and normal (CAW) input, you should consider usinc_
the Channel Fix feature, (see page 26).
Your Sony remote control can be programmed to operate your cable box,
(see page 36).
When using PIP,you cannot view the AUX input in the window picture.
4