Cable Box Connections - Sony KV-27FS13 Service Manual

Operating Instructions

Cable Box Connections

Some cable TV systems use scrambled or encoded signals that require a
cable box to view all channels. If you subscribe to that kind of cable
service, use this connection. Scrambled signals coming in to the TV
through the cable box cannot be viewed in PIP. If some of your channels
are scrambled, consider using the Cable Box and Cable connection (see
page 5).
Cable Box and TV
1
From
cable
1
Connect the coaxial cable from your cable service to the IN jack on
your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the VHF/UHF jack on your TV.


If you will be controlling all channel selection through your cable box, you
should consider using the Channel Fix feature by setting your TV to channel 3
or 4, (see page 27).
4
Cable Box
2
Rear of TV