Cable Box Connections; Cable Box And Cable; Stasenien - Sony Trinitron KV-20V80 Operating Instructions Manual

MME connecting and Installing the TV (continued)
Cable Box Connections
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
Cable box
1 Connect the coaxial connector from your
cable or antenna to the IN on your cable
box.
2 Using a coaxial cable, connect OUT on
your cable box to VHF/UHF on your TV.
Cable box and cable
¢ KV-27S65, 27V65 only : -
For this set up, you can switch between
scrambled channels (through your cable box),
and normal (CATV) channels by pressing
ANT on your remote control.
Notes
¢ Your Sony remote control can be
programmed to operate your cable box.
(see page 28)
* When using PIP, you cannot view the
window picture with the AUX input.
If you will be controlling all channel selection
through your cable box, you should consider using
the CHANNEL FIX feature discussed on page 23.
Rear of Tv)
VHF AUHE
cp")
Cable
j
»
Bee ae
hat
*Cable box
if you are connecting a cable box through the AUX input and would
like to switch between the AUX and normal (CATV) input you should
consider using the CHANNEL FIX feature discussed on page 23.
*Cable box (Rear at TV)
AUA
oc
scrambled
channels
TO CONVERTER
-O=—D—«)
fG ohn, coaxial
+ (signal)
,
VEE GH
=D)
Soca bybe
cable (not supplied)
Can
funsceamb:
sa cherie! s)