Connecting Additional Equipment - Sony FD Trinitron WEGA KV-27FS16 Operating Instructions Manual

Connecting Additional Equipment
TV and VCR
Rear of TV
2
VCR
,_ N LINE
From _
cable/
antenna
¥ I _t/D_O U.
3 (Optional connection)
1
2
Connect the coaxial cable from your TV antenna or cable service to
the IN jack on your VCR.
Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF jack on the TV.
_hJ To watch video programs from your VCR, tune your TV to channel 3 or 4 (as
seton the rear of your VCR).
(Optional connection)
3 If your VCR is equipped with video outputs, you can get better
picture quality by connecting A/V cables (not supplied) from
AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on
your TV.
_:_ For optimum picture quality, use S VIDEO instead of the yellow AN cable.
S VIDEO does not provide sound, the audio cables must still be connected.
-_ You can use the wc_° button to switch between the VHF/UHF and VIDEO
inputs.
5