Changing The Wide Screen Mode Manually - Sony KE-32TS2U Operating Instructions Manual

Watching the TV
Changing the Wide Screen Mode
manually
You can change the Wide Screen Mode manually
with the WIDE MODE button. When the antenna
reception is low, or the picture is too dark, the Auto
Wide function may not work properly. In this case,
set the Wide Screen Mode manually.
WIDE MODE
Press WIDE MODE repeatedly until the desired
Wide Screen Mode appears.
Pressing the WIDE MODE button once lets the TV
select the best Wide Screen Mode, and the selected
Wide Screen Mode appears.* Each time you press
the button, Wide Screen Mode changes as follows.
For details on Wide Screen Mode, see page 29.
WIDE MODE
Changing the Wide Setup
Auto Wide setting has two options: "Mode 1" and
"Mode2."
Auto Wide: "Model"
Normal broadcast (4:3 aspect ratio) transmits the
control signal together with the picture signal. Some
video equipment, such as camcorders, transmit the
control signal *_ as well. In "Model," the TV detects
the control signal and displays the picture with its
original aspect ratio. Note that black bands may
appear near the frame, or part of the picture may not
appear, if you select the Wide Screen Mode
manually while watching the picture without the
control signal.
Auto Wide: "Mode2"
In "Mode2," the TV selects the best Wide Screen
Mode automatically to fit the wide screen, regardless
of the control signal.
The fadory setting of this TV is:
"Aulo Wide" is set to "Mode2," and "4:3 Default" is set to
"Widezoom."
* _Control signal which returns the picture to its original aspect
ratio. The following include the control signal.
- Pictures from camcorder with specified aspect ratio
- Broadcasts with the 4:3 aspect ratio signal
* When "Auto Wide" in the _ (Screen Control) menu is set to
"Mode2," and the "4:3 Default" is set Io "Normal" (page 31 ),
the picture remains 4:3 aspect ralio ("Normal").
Tip
Set "Aulo Wide" 1o "Off" when changing the Wide Screen
Mode manually (See page 31).
30 (us)