Connecting A Dvd Player With A/V Connectors - Sony KE-32TS2U Operating Instructions Manual

Installing and Connecting the TV
Connecting a DVD Player with A/V Connectors
Use this hookup if:
• Your DVD player does not have component (Y, P_, P_0 jacks.
Tip
If your DVD player has video component oulput conneclors, for best picture quality, use the
connection described on page 14.
Disconnect all power sources before making any connections.
1 Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
2 Using an S VIDEO cable, connect the DVD player's S VIDEO jack to
the TV's S VIDEO jack.
Rear of TV
AUDIO'R (red) -_-_I
AUDIO-L (white) --_
t
"-o S VIDEO
2
RK-74A ---_-"
(not supplied i
,_ R I0 L _IDEO VIDEO
DVD player
_-_-_-_-_ YC-15V/30V
(not supplied)
Note
"I% watch the pictures input from the S VIDEO input jack, set "Aulo YC" Io "On" in the
(Cuslom Setup) menu (see page 10).
Tips
• To take advantage of the Wide Screen Modes, set the TV's aspect ratio Io 16:9 on your
DVD player. For details, refer Io the operaling inslructions supplied with your DVD player.
• Use TV/VIDEO on the remote to swilch between the VCR and DVD player inputs. Use 0-9
and ENTER or CH +/- on the remote Io walch cable TV.
• If your DVD player is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of
the S VIDEO cable.
(us)15