Sony KP-53HS30 Operating Instructions Manual page 71

Other Information
Problem Possible Remedies
Projection TV is fixed to one
channel
Double images or ghosts
.1
LI
.1
Cannot operate merit. .1
U
Cannot receive an3 channels t.l
when using cable "IV
Cannot gain enough volume .1
when using a cable box
Channel Index does not display
all available charmels t_l
Cannot receive channels t_l
Unable to select a channel
Use Auto Program in the Channel menu to add receivable channels that are not
presently m TV memory. (see page 53)
Check your Channel Fix settings. (see page 53/
Use a highly directional outdoor anterma or a cable (when the problem is caused by
reflections from nearby mountains or tall buildings).
lithe item you want to choose appears m gray, you cannot select it.
rum the proJection TV's power offand on again
Use Auto Program in the Channel menu to add receivable channels that are not
presently m TV memory. (see page 53)
Check your cable settings.
Make sure Cable is set to ON in the Channel menu. see page 52/
Increase the volume of the cable box using the cable box's remote control, Then
press TV (FUNCTION) and adjust the projection TV's volume.
Make sure Cable is set to ON in the Channel menu. see "Cable" on page 52)
Use Auto Program in the Channel menu to add receivable TV channels that are
not presently m TV memory, tsee page 53/
Use Auto Program in the Channel menu to add receivable TV channels that are
not presently in TV memory. (see page 53)
Lost password
.I
Cannot change channels with
_1
the remote control
.I
Cannot cycle through the other ..1
vMeo eqmpment connected to
the projection TV
There is a black box on the U
screen
In the password screen _see page 54/. enter the follouilng master password: 4357.
fhe master password clears your previous password: it cannot be used to
temporarily unblock channels.
Be sure you have not inadvertently switched your projection TV from channel 3 or
4 setting if you are using another device to change channels.
lfyou are using another device to control channels, be sure the "function" button
for that device has been pressed, or the slide switch is set correct b For example, if
you are using your cable to control channels, be sure to press SAT/CABLE.
Be sure the Video Label feature has not been set to Skip. tsee page 64
You have selected a text option in the Setup menu and no text is available., see
page 63 to reset Setup selections] To turn this feature off. select OFF in the
Gaption Vision option. If you were trying to get closed captioning, select CG1
instead of Text I-4
There is no twin picture or it is _1
J [k_[ StatiC [..1
Be sure your twin picture is set to a video source/channel that has a program alring.
You may be tuned to a vMeo input with nothing connected to it. Try cycling
through your vtdeo inputs using W/VIDEO.
£wm View is not set to receive a signal from the AUX input, if you have
connected a VCR. DVD player or satellite receiver to the AUX input on the
projection TV. it will not show in the second picture,
O
(Continued)
71