Sony KP-53HS30 Operating Instructions Manual page 66

Other Information
I
I m.== (÷_ =,_=
®®®1
o
m
-3
-2
-4
-5
To program video equipment
1 Open the panel of the remote control.
_} Move the slide switch to the desired componcnt rypc.
3 Press CODE SET inside the panel
4 Close the pancl and enter the thrce-digit manufacturer's code number
using the 0-9 buttons.
5 Press ENTER.
6 To check if the code number works, aim the projection TV's remote
control at the component, open the panel, and press the green POWER
button, tfit responds, the programn_mg is completed. If not. try using
the other codes listed for that manufacturer.
Tips
_t
If more than one code number is listed, try entering them one bv one
until you come ro the correct code for your componem
[..I tf you enter a new code number, the code number yon previously
entered at that setting is erased.
J In some rare cases, you may not be able to operate your component with
the Sony remote control. In this case. use the component's own remote
control unit.
66