Tv Automaticall'y - Sony KP-53HS30 Operating Instructions Manual

Installing and Connecting the Projection TV
Setting Up the Projection TV Automatically
Afler you finish connecting your projection TV, you can rtm Auto Setup to
set up your channels. The Auto Setup screen appears when you turn your
projection TV on for the first time after installing it. If you do not want to set
up the channels at this time, you can do it later by using the Auto Program
feature in the Channel menu. (see page 53)
Using Auto Setup
1
2
3
Press POWER on the front panel of your projection TV or on the remote
control to turn on the projection TV.
Press the TV/FUNCTIONI button on your remote control. Red light will
briefly appear.
Press CH+ on your projection TV to run Auto Setup, or press CH- to
exit. If you use the channel buttons on your remote control, be sure to
use the main set of buttons (HI "
Projection TV front panel
"ilM EP.IS't_/DBY
9OA_IE
WNIDEO
MENU
OSQ
+ .
-1
-3
32