Sony KP-53HS30 Operating Instructions Manual page 24

Installing and Connecting the Projection TV
Connecting a Satellite Receiver with a VCR
VMC*810S/820S.--
(not supplied)
Disconnect all power sources before making any connections.
1 Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2 Connect the CATV cable to the VCR's VHF/UHF IN jack.
3 Using a coaxial cable, connect the VCR's 0UTjack to the projection
TV's VHF/UHF jack.
4 Using AUDIO and S VIDE0 cables, connect thc satcllite receiver's
AUDIO and S VIDEO OUT jacks to the VCR's AUDIO and S VIDEO
IN jacks,
5 Using AUDIO and S VIDEO cables, connect the VCR's AUDIO and S
VIDEO OUT jacks to the TV's AUDIO and S VIDEO ]N jacks.
Rear of projection TV t _1 Satellite
Satellite receivel _ t]enna
24