Table of Contents
Advertisement
Turn on your TV and set it to the channel
you selected
in step 1 (3CH or 4CH).
The channel
you selected
ill step 4 appears
on the TV screen.
If the channels
change
when you press CH +/ , you have made the correct
setting.
Whenever
you use the DVD-VCR,
set the TV to the channel
selected
in step 1.
Attaching
the external
antenna
connector
When using a 300-ohm
twin lead cable for a
VHF/UHF
antenna,
use an antenna
connector
(not supplied)
to connect
the antenna
to the
DVD-VCR.
300-ohm twin
lead cable
Antenna
connector
(not supplied)
Loosen
the screws
O11
the antenna
connector.
Wind the twin leads around
the screws on the antenna
connector.
Retighten
the screws.
Attaching
a VHF/UHF
band mixer
When using both a 75-ohna coaxial
cable and
a 300-ohm
twin lead cable for a VHF/UHF
antenna,
use a VHF/UHF
band separator/
mixer (not supplied)
to connect
the antenna
to the DVD-VCR.
300-ohm twin
lead cable
75-ohm coaxial
cable
Loosen
the screws on the mixer.
Wind the twin leads around
the screws on the mixer.
Retighten
the screws.
Connect
the 75-ohm
coaxial
cable to the mixer.
VHF/UHF
band
separator/
mixer (not
supplied)
5"
.-t
=_
O
General setup information
99
Advertisement
Table of Contents
