Table of Contents
Advertisement
Notes
• The clock cannot be set automatically
if you do not receive a chalmel that carries a time
signal in your area. If so, set the clock manually (page 22).
• If there are only a fc'_ channels in your area that carry time signals, setting the clock
automatically may take up to about 20 minutes. If nothing happens even after you wait about
20 minutes, set the clock manually (page 22).
• If you made Hookup 3, make sure you leave the cable box on.
• To record TV programs using the timer, you must set the clock accurately.
• The clock display appears when VIDEO mode is selected with no tape inserted or when the
DVD-VCR is turned off.
Using Manual Clock Set
Before
you start...
• Tnrn on the DVD-VCR
and your TV.
• To control
the DVD-VCR,
set TV /
DVD.VIDEO
to DVD.VIDEO
on the
remote
(page
10).
• Set the "RF Output
Channel"
to "3CH"
or
"4CH"
in "OPTION
SETUP"
menu
(page 97).
If your TV is connected
to the
DVD-VCR
using A/V connections,
set the
TV to video input.
• If the DVD player is in play mode, you
cannot display
the setup menu,
Stop the
DVD playback.
o®ooi
OOOOi
÷÷®®i
o÷÷i
@®®
.............
SET UP
4/_'/*/,*"
SET UP
O
Press SET UP, then press t_/I!, to select
(OFI'ION)
and press ENTER.
2
Press i./II, to select "Clock
Set/Adjnst",
then
press ENTER.
The "CLOCK
SET/ADJUST"
menu
appears.
CLOCK
SET/ADJUST
22
Setting the clock
Advertisement
Table of Contents
