Table of Contents
Advertisement
SETUP
Press SET UP to exit the menu.
©
Menu choices
Tile default
settings
are indicated
ill bold print.
Menu option
Set this option to
Auto Power Off
• "Off" to deactivnte the A/lto Po'_x er Off f/lnction.
• "lHr"/"2Hr"
to turn the DVD-VCR off automatically
if no
signal is received and you do not press any of the buttons
during this time.
RF Output Channel
• "SCI-t" when using channel 3 to receive the VCR signal.
• "4(!H" when using channel 4 to receive the VCR signah
For details, see page 98.
Setting the RF Output
channel
When connecting
tile DVD-VCR
to tile TV
using only the antenna
cable, you must set
the RF Output
channel
in the "OPTION
SETUP"
menu so that the TV can receive the
correct
signal from the DVD-VCR.
/
F
TV
I
II _
II
eoe_
Q®®
©®®
O@O0
000@
OOOO
bo®e
@Q®
--
TV/VIDEO
Set the RF Output channel to "3CH" or "4CH" (see page 97 to set the channel),
whichever channel is not used in your area. If both are used, set the switch to
either channel.
Press I/(_) to turn on the DVD-VCR.
Press TV/VIDEO to turn on "VIDEO" in the DVD-VCR's display window.
Press CH +1- to display a channel number in the display window.
Select an active channel mnnber in your area.
98
General setup information
Advertisement
Table of Contents
