Table of Contents
Advertisement
133
O
O
.=
._E
I-
Symptom
Tile timer dues not operate.
A tape cannot be inserted.
Tile VCR mechanism needs tu be
cleaned.
i1)
Control by AV mouse is not possible.
Remedy
• Check that tile clock is set.
• Make sure a tape has been inserted.
• Check that tile safety tab has nut been removed.
• Make sure the tape is not at its end.
• Make sure a program has been set for timer recording.
• Make sure your timer settings are past the current time.
• Check that tile cable box is turned on.
• The clock stups if the DVD-VCR is disconnected
from
the wall outlet for more than one minute. Reset tile clock
and timer.
• Turn tile power off and unplug the AC power cord.
• Check that a tape is not already in the rope compartment.
• Clean the cabinet, panel and controls with a dry, sofl
cloth, ur a suft cloth slightly muistened with a mild
detergent sulution.
Do not use any type uf sulvent, such
_Jsalcohol or benzine.
• Tile unit is nut compatible with satellite TV receiver AV
UlOUSe, etc.
Symptoms caused by contaminated
video heads
• Normal picture
• Rough picture
• Unclear picture
• No picture (or
black & white
screen appears)
initial
contamination
=
terminal
104 Troubleshooting
Advertisement
Table of Contents
