Sony Handycam CCD-TR416 Operating Instructions Manual page 7

Charging the battery pack
Charge the battery pack on a flat surface without vibration. The batlery pack is charged
,I little infile hl_tor\
(1) Open lhe IX2 iN ia_.k covur and connect the supplied .,\C power adaptor to the
DC IN jack with the plug's • mark up.
(2) ( onneet the power cord to the AC power adaptor.
(3) Connect the power curd to a wall outlet.
(4) Slide the POWEI{ switch to OFF, Remai_ling battery time is indicated b\ the
minutes o1"1 the
display window. Charging begins
_Ahen the remaining batter>' indk:ator becomes (i]; normal charge is completed For
full charge, which allows _uu to use the battery longer than u'_ual, leave the battery
pmk ath_ched h_ _d_.,m! ! hour alter normal charge it, completed until FULL appear', m
the displa} wiDdow,
I_elore using the can/colder v, ith the batter) pack, unplug the AC power adaptor irom
the 1")(7IN jack oi the camcc, rdel You call ,tlc, o ilge the
hatlcl} }la(k
befitrc it is
cumpletelv charged.
5_
Notes
• " l:llin" appears on the displa} until the eamcorder ealculates remaining battery
lime.
• Remaining
battery time indication in the display window roughly indicates the
recording time. Use it as a g_fide It may differ from the actual recording time.
• If there is a slight difference in shape botween the plug of power cord and the terminal
of AC power adaptor, it is ignorable for their mutual connection and power supply
• B,, stm, to plug fl_e power cord deeply into the terminal of AC power adaptor so that it
is firmly locked. If there is a gap between the plug of power cord and the terminal of
AC power adaptor, it dues not affect the efficiency of the AC power adaptor.