Sony Handycam CCD-TR416 Operating Instructions Manual page 47

Replacing the bulb
Use the Sony Xt_,-BDhalogen lamp (not supplied). '['he supplied halogml lamp is not on
the market.
Purdlasc tilt, Sony XB 3D halogen km_p
Remove tl_e power souree before replacing the bulb.
(1) While pushing the hole under the buiItdn light unit using a wire. remo_ e the
unit.
(2) Turn the bulb housing counterclockwise and detach from [he built-in light
unit. .,_
(3) Replace the bulb using a dry cloth
(4) Attach the bulb housing turning it clockwise, then replace the built-in light
unit.
r
2
3
<
O
o
[I!'alli_/0]_l
• When replacing the bulb, use o[dy the Sony XB 3D halogen 1amp (not supplied) to
reduce tee risk of tire.
• To pre'_ent possible burn hazard, disconnect the power source before replacing and
do not toucl7 the bulb _mtil fl{e btllb becomes cool
ellOLIgt/ [0
handle (Ior about
30 minutes or more).
Note
Io prevertt the bulb _rom being_ smudged with finger prints, handle it v_ilh a dr) cloth,
et(. If the bulb is smudged _ipe it completely.
47