Control - Sony Grand Wega KF-60DX100 Operating Instructions Manual

Installing and Connecting the LCD Projection TV
Setting Up the LCD projection TV Automatically
After '..ou finish connecting your LCD projection TV, you can ran Auto
Setup to set up your channels. The Auto Setup screen appears when you turn
your LCD projection TV on for the first time after installing it. If you do not
want to set up the channels at this time, you can do it later by using the Auto
Program feature in the Channel menu (see page 63).
_._ The Auto Setup feature does not apply for installations that use a cable
box for all channel selection
Using Auto Setup 1 Press POWER on the front panel of your LCD projection TV or on the
remote control to turn on the LCD prqicction TV.
2 Press the TV [FUNCTION) button on your remote control. Red light will
briefly appear.
3 Press CH+ on your LCD proj ection TV to run Auto Setup, or press CH-
to exit. lfyou use the channel buttons on your remote control_ be sure to
use the main set of buttons 1_ _.
LCD projection TV front panel t
[] [] [] pOWER
LAMP STEREO TIMER/STAND BY
3
'_ You can run Auto Program by selecting it in the Channelmenu. as
described on page 63.
42