Sony Grand Wega KF-60DX100 Operating Instructions Manual page 13

Introducing the Sony LCD Projection TV
Replacing the Lamp
The projection lamp has a limited life
lfthe screen becomes dark. the color looks unusual, or the LAMP indicator
on the front of the LCD projection TV flashes, it is time ro replace the lamp
with a new one (not supplied).
/_ WARNING
Electric appliances can cause fire or high temperature, resulting in injury
or death Be sure to follow the instructions below.
Use a Sony XL-2000U replacement lamp (not supplied for
replaeemunt. Failure to do so may damage the LCD projection TV.
Do not remove the lamp for any purpose other than replacement.
Failure to do so may cause fire or a skin bum.
Before replacing the lamp. turn the power off on the main unit. then
several minutes later, unplug the power cord. JThe cooling fan will
continue to blow for about two n_mutes after turning the power off:
Before replacing the lamp, let it cool down completely, as the surface of
the lamp remains extremelzv hot for at least 30 minutes after the power
has been turned oft:
Do not leave the removed lamp near flammable materials or within the
reach of children.
[21 Do not pour water onto the removed lamp, or put any object inside the
lamp. Doing so may cause the lamp to burst
Do not put flammable materials and metal objects inside the lamp
receptacle of the LCD projection TV after removing the lamp. Doing so
nray cause fire or electrical shock. Also. be sure not to touch the
receptacle, because it may cause a skin burn.
Mount the new lan_p securely, otherwise the screen may become dark.
or it may cause a fire.
Collecting the used lamp
For environmental conservation, Sony collects the used lamps. Please put the
used lamp in the lamp box and give it to your Sony dealer where you bought
the lain F.
Do not touch the front g_assof a new lamp or the glass of the lamp
receptacle.This may reduce picture quality or lamp life.
o
p,
ca
¢1
(Continued)
13