Sony Grand Wega KF-60DX100 Operating Instructions Manual page 15

5
Introducing the Sony LCD Projection TV
Loosen the two screws that secure the lamp, then pull out the lamp.
Fhe lamp is very hot immediately after use. Never touch the front glass
_fthe lamp or the surrounding parts.
Loosen the two screws with the
hex key supplied with the lamp.
Hold the handle and pull
straight out.
After it hascooled place the removed lamp into the empty box of the
replacement lamp. Never put the removed lamp into a plastic bag
6 Mount the new lamp.
Bc sure to attach the new lanap securely.
2.
O
p,
Mount the new lamp securely
into the lamp receptacle.
Tighten the two screws securely in the
order of (_) to _), as shown in the
illustration using the supplied hex key.
7 Motmt the lamp cover and tighten the screw.
Make sure that the lamp cover is mounted securely, otherwise the power
will not turn on.
/
• atch the projection of the right
side of the lamp cover with the
_ole of the unit, and replace the
amp cover as it was.
If the lamp cover is not mounted securely, the self-diagnostic
function works and the TIMER/STANDBY indicator flashes for three
times (See page 851
(Continued)
15