Sony Grand Wega KF-60DX100 Operating Instructions Manual page 34

Installing and Connecting the LCD Projection TV
Connecting a Satellite Receiver with a VCR
Disconnect all power sources before making any connections,
1 Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2 Connect the CATV cable to the VCR's VHF/UHF 1N jack.
3 Using a coaxial cable, connect the VCR's OUT jack to the LCD
projection TV's VHF/UHF jack.
4 Using AUDIO and S V1DEO cables, connect the satellite receiver's
AUDIO and S VIDEO OUT jacks to the VCR's AUDIO and S VtDE0
IN jacks.
5 Using AUDIO and S VIDEO cables, connect the VCR's AUDIO and S
VIDEO 0UTjacks to the LCD projection TV's AUDIO and S VIDEO
IN jacks.
Rear of LCD projection TV
Satellite _ t
antenna
Satellite receiver cable
_ AAUDtO-R (red)i_
I AUDIO-L(white), _
VIDEO (yellow) )_.
VMC-810SI820S
(not supplied)
YC-15V/30V
(not supplied)
Coaxial cable
3
YC-15V/30V (not supplied)
VCR
,_2 Be sure your VCR'svideo input is set correctly. Consult your VCR's
operating manual for instructions.
Use TV/VIDEOto select
- VIDEO1 to watch satellite TV or the VCR (your VCR must be turned on).
- qHF/UHFto watch cable TV
If your VCRor satellite receiver is not equipped with S VIDEO use a
VIDEOcable (yellow) instead of the S VIDEOcable.
34