Sony KDF-37H1000 Operating Instructions Manual page 33

iiiii
MTS Stereo
For stereo reception when viewing a TV program broadcast in stereo.
Et_jo 3 stereo, bilingual Auto SAP Automatically switches the TV to second studio programs when a
and mono programs SAP signal is received. If no SAP signal is present, the TV remains in
Stereo mode.
Mono For mono reception. Use to reduce noise during weak stereo
broadcasts.
• MTS is available only for analog programs.
Speakers TV Speakers
Select to use the TV speakers for audio.
Audio System Select this option if you wish to use an external audio system for the
TV sound. By selecting this option you are disabling the TV speakers.
Audio Out Fixed Select to fix the audio output and allow you to adjust the volume with
Eas 3 control your audio system's remote control. (The TV's remote control's
qflolume VOLUME and MUTING buttons have no effect on the Audio Out.)
ad/ustment_' Variable Select to control the Audio Out's volume and nmting with your TV's
remote control.
• Alternate Audio feature is available only for digital programs. If the program you are watching is also available in
other languages from the audio tracks, and if that language is what you have selected in the Language setting, your
TV will automatically switch to the matching language with the Alternate Audio feature. The Alternate Audio
option may be accessed by pressing the OPTIONS button on the remote control when alternate audio stream is
available from the broadcaster.
"d
(n
Cable On For receiving cable channels via cable TV provider.
Off For using an antenna.
• You should run Auto
Program
after changing the Cable setting.
Auto
Program
Automatically sets tip the channel list on the TV for all receivable channels. Channel
scanning will be based on the Cable On/Off setting.
1 Select Auto
Program.
Select OK to start Auto
Program.
When Auto
Program
is completed, the screen
will display the number of channels found.
Press RETURN to exit the Auto
Program.
• Running Auto Program will clear Favorites list.
• If you run Auto
Program
again, previously scanned channels will be overwritten with
the newly scanned channels.
(Continued)
33