Download  Print this page
   

Advertisement

3-100-645-11(1)
KDF-37H1000

Quick Setup Guide

For further information, see the Operating Instruction Manual supplied with the TV.
Please retain this guide for your future reference.
For Your Convenience
Please contact Sony directly if you have questions on the use of your television
after reading your Quick Setup Guide and Operating Instruction Manual.
Contact Sony Customer Support at:
http://www.sony.com/tvsupport
Or to speak with a support representative:
United States
Canada
1-800-222-SONY (7669)
1-877-899-SONY (7669)
Please Do Not Return the Product to the Store
©2007 Sony Corporation
Printed in U.S.A.

Running Initial Setup

3
Initial Setup instructions are displayed on the screen when your BRAVIA™ is powered on
for the first time.
1
Select the language for the OSD (on screen display).
Step 1 of 5
Initial Setup
Please select a language. Language settings will apply to
on screen display as well as default audio for digital
channels. Highlight a choice and press
to continue.
English
Español
Français
2
Connect either Antenna or Cable to your TV.
Initial Setup
Step 2 of 5
Select Auto Program to advance to the
Auto Program allows the TV to tune channels directly from your
Auto Programming.
cable or antenna feed. If you are using only a cable or satellite
set top box, it is not necessary to run Auto Program. In this case,
choose "Skip". Auto Program may take 30+ minutes to complete.
If you are not using the VHF/UHF/CABLE
Auto Program
VHF/UHF/CABLE
connection to TV, you can cancel the Auto
Skip
Program by selecting the Skip option.
3
Your TV will detect the type of signal connected and will start scanning for the channels.
Initial Setup
Step 3 of 5
Please allow 30+ minutes to complete.
Pressing
or
will cancel auto program.
Channels Found
Analog:
58
Digital:
0
Searching...
4
Follow on-screen instructions to complete setup and begin viewing your TV.
Step 5 of 5
Initial Setup
Select
"
OK
"
to use your TV
OK
BRAVIA
1
Your New
LCD Projection HDTV
Congratulations! Your new BRAVIA™ opens the door to the "Stunning HD Experience".
This guide will explain how to get the most from your new High Definition TV.
Learn more. Visit the Sony HDTV Learning Center www.sony.com/HDTV
Please take these steps before you power up your BRAVIA™:
Register online at:
www.sony.com/registration (from U.S.A.)
www.SonyStyle.ca/registration (from Canada)
Make sure you've removed all accessory contents from packaging.
Install 2 AA batteries (supplied separately) in your remote control.
Give your TV 4 inches (10 cm) of space behind it to properly ventilate.
The Four Steps to a Stunning HD Experience: Set, Sound,
Source, and Setup
Along with your BRAVIA™ TV set, a complete HD system requires an HD sound system, a
source of HD content, and proper setup connection with components such as your HD cable
or satellite box.
You must get HD programming to experience the stunning detail of HDTV.
The quality of the image you see on your BRAVIA™ can only be as high as the quality of the
signal it is displaying. This chart shows the different signal types and how to access them.
Best Signal
Comments
Sources
Performance
HD Over-The-Air Antenna
High Definition
Best Picture Quality 16:9
HD Cable Subscription/
Content
Aspect Ratio
Programming
HD Satellite Subscription
Good Picture Quality
Over-The-Air Antenna
Digital Content
Aspect Ratio based on
Digital Cable Subscription
Program
Digital Satellite Subscription
Original TV format 4:3
Over-The-Air Antenna
Analog Content
Aspect Ratio
Cable Subscription
Contact your cable or satellite provider to upgrade your service to HD. Receive over-the-air
HD broadcasts with an HD-quality antenna (www.antennaweb.org) and discover the wealth
of entertainment now available on super-high-resolution Blu-ray Disc™.
To Access Initial Setup by Remote Control
If you did not follow the Initial Setup screen the first time, press the HOME button on your
remote control to display the TV Home Menu/XMB™ (XrossMediaBar) and select the Initial
Setup icon under the Settings category.
1
XMB™ (XrossMediaBar) appears.
HDMI Settings
General
1.2.3
TV
2
Select Initial Setup icon.
Settings
Start Initial Setup now?
Some channels may be overwritten.
1.2.3
Yes
No
To Do List
When the Initial Setup is completed, consider carrying out these items:
Set Clock
Set Closed Captions (CC)
Set Parental Lock
Show/Hide Channels
Label Inputs (skip inputs)
Speakers On/Off
For details, refer to your BRAVIA™ Operating Instruction Manual.
2

Connecting Your TV

Your BRAVIA™ must be properly connected to components such as sound system and cable or satellite box.
See reverse side of this poster for sample connection diagrams.
Turn off and unplug all components before making connections.
Do not turn on the TV until connection setup is completed.
Audio/Video
Input
Video Connection
Performance
Connector
HDMI 1
HDMI 2
HDMI connection*
Component 1
Component 2
Component 3
Component connection
Video 1
S VIDEO connection
(Use this connector in place of composite video connector)
Video 1
Video 2
Video 3
Composite video connection
(Shown with video and audio connectors)
What is HDMI™?
HDMI (High-Definition Multimedia Interface) cables are the standard for connecting HDTV. They are built to properly handle high bandwidth, uncompressed video and multi-channel
audio—all in one cable.
Connecting a PC to Your BRAVIA™
May require DVI-to-HDMI adapter and separate audio connector.
Connect PC's audio output when using a Digital Video Interface (DVI) connection.
Refer to BRAVIA™ Operating Instruction Manual for more information.
To learn more about HDTV, visit www.sony.com/HDTV

Watching Your TV

4
Select Your Content Source
Whether you are watching cable, satellite or broadcast TV; playing a VCR, DVD or Blu-ray
Disc™; or connecting to your PC, you need to choose the correct Input using your remote
control:
Press the HOME button on your remote control to display on-screen the TV mode or
External Inputs selection menu; OR
Press the INPUT button repeatedly until your selection is highlighted on-screen.
Adjust Screen Shape and Aspect Ratio
High Definition and Standard Definition signals are transmitted with different aspect ratios
(the width-to-height shape of the image). Most HD signals use a widescreen aspect ratio of
16:9. Most SD signals use a boxy 4:3 aspect ratio. The 16:9 aspect ratio looks perfect on your
BRAVIA™, but a 4:3 image must be adjusted to look right. You can:
Adjust your TV so boxy 4:3 images are automatically re-configured (zoomed or
stretched) to fit the wide TV screen; OR
Watch SD content in its original, boxy format with wide black bars surrounding the
image to fill in unused space (for example, you may prefer to watch an old classic movie
in its original 4:3 format, not reconfigured for a wide screen).
Press the WIDE button on your remote control to display the Wide Mode setting of
your preference.
Visit
www.learningcenter.sony.us/HomeAudioandVideo/Televisions/Research1/TheBasicsofDTV
for more information.
Customize Sound and Picture Quality
You can choose optimum sound and picture settings to match the content you are displaying
on your TV:
Press the HOME button on your remote control and select Picture or Sound. Choose
the appropriate setting for your content.
Use the remote control OPTIONS button to quickly adjust sound and picture quality.
Refer to your BRAVIA™ Operating Instruction Manual for more information.
To learn more about HDTV, visit www.sony.com/HDTV
Audio Connection
High or Standard Definition Quality
HDMI cable carries both video and audio signals.
1080p, 1080i, 720p, 480p, 480i, PC
Separate audio cable is not needed.
(Compatible with HD or SD content)
(*When HDMI is connected to DVI with an adapter,
a separate audio L/R is necessary.)
1080i, 720p, 480p, 480i
(Compatible with HD or SD content)
Audio L/R
Audio L/R
480i
(SD content)
Audio L/R
XMB™ (XrossMediaBar) with focus on
Settings. Select Settings to customize
your TV.
Product Support
Clock/Timers
Sound
Screen
Video Options
XMB™ (XrossMediaBar) with focus on TV
mode. Select the channels from here or
use the 0-9 number buttons on your
remote control.
7
8
8.1
Cable
KFMB-DT
9
10
10.1
11
XMB™ (XrossMediaBar) with focus on
External Inputs. Select connected device
from here or use the INPUT button on
your remote control.
Video/Component2
Video 3
Component3
HDMI1
HDMI2
TV
TV
TV

Advertisement

Table of Contents

   Summary of Contents for Sony BRAVIA KDF-37H1000

  • Page 1: Connecting Your Tv

    Digital Content Aspect Ratio based on Digital Cable Subscription audio—all in one cable. Please contact Sony directly if you have questions on the use of your television Program Digital Satellite Subscription after reading your Quick Setup Guide and Operating Instruction Manual.
  • Page 2 HD Basic Connection HD Basic Connection with A/V Receiver HD Basic Connection with Home Theater System Cable/Antenna Cable/Antenna HD Antenna Rear of TV Splitter Splitter Rear of TV Blu-ray Disc™/DVD Rear of TV Blu-ray Disc™/DVD Cable/SAT (dish) Blu-ray Disc™/DVD Plus SD Cable Box or SD Satellite Receiver HD Cable Box...

Comments to this Manuals

Symbols: 0
Latest comments: