Sony KDF-37H1000 Operating Instructions Manual page 21

[] Speaker Outputs the audio signal.
[]
TIMER LED
Lights up in orange when the timer is set. When the timer is set, this LED will remain lit
even if the TV is turned off. For details, see page 28.
[] LAMP LED The projection lamp has burned out. Replace it with new one (see page 39).
[]
POWER LED
Lights up in green when the TV is turned on. Also lights up in red during the diagnostics.
[] (IR) Infrared Receives IR signals from the remote control.
Receiver Do not put anything near the sensor, as its function may be affected.
[]
POWER
Press to turn on and offthe TV.
[] CHANNEL +/- Press to scan through channels. To scan quickly through channels, press and hold down
either +/-.
[] VOLUME+1-
Press to adjust the volume.
[] INPUT Press to display the list of
External Inputs
and TV mode.
Press repeatedly to toggle through the inputs.
• See page 37 on setting up the External
Inputs
labels, including the Skip feature.
[]
HOME
Press to display
the TV Home Menu/XMB
TM
(XrossMediaBar)
to access the TV Home
Menu items such as the TV
Settings,
TV channels and External
Inputs
list (see
pages 7 and 26).
o.
• While XMB
TM
is displayed, the [_, [] and [] become navigational buttons. Use them
to navigate on the XMB r:'_. When HOME is pressed again, these buttons will activate
the CHANNEL +/-, VOLUME +/- and INPUT operation.
21