Special Playback - Sylvania SRC2019AC Owner's Manual

SPECIAL PLAYBACK
Make sure ...
• TV/VCR power must be turned on.
• Insert a prerecorded tape.
• Before playback, follow steps below.
This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
I Select "USER'S SET UP"
Press the MENU button on the _- _E_-
Tt_ER p _,O_NG
remote control, ,,¢*u,Eco,v,oL
SETTING CLOCK
CHANt_EL SET UP
Press the PLAY/& or STOP/v but- U_E,S_TU,
t_NGUt, GE [ENGUSH i
ton to point to "USER'S SET UP". zE_o°"_",_,u,_c°"'
Then, press the F.FWD/I_ button. _,ME_,_C,
2
Set "RENTAL" to [ON]
Press the PLAY/A or STOP/V but-
ton to point to "RENTAL".
Press the EFWD/_ or REW/4
button until [ON] appears.
-USERS_ETUP [
REPEAT Platy IC_ •
AUTO RETURN [O_F]
3
Exit the Rental setting
Press the MENU button on the remote control to
return to the TV mode.
4
Start playback
Press the PLAY button to start playback, "RENTAL
PLAY II_" appears.
• Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.
TO CANCEL THE RENTAL MODE
Repeat steps [l] and [2], select [OFF] using the
EFWD/I_ or REW/a[ button on the remote control.
Press the MENU button on the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
The TV/VCR has the auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAY button.
ALL REPEAT: Repeat playback from the beginning
to the end of the tape.
BLANK REPEAT: Repeat playback from the begin-
ning to a blank part, which is blank for more than
I 0 seconds.
1
Select "USER'S SET UP"
Press the MENU button on the I_
"_"u
TIMER pROGRAM'_ING
_ICTUR_ CONTROL
remote control. _,,_ o_o_
GHAttNEL SET OF'
USERS SET UP
Press the PLAY/A or STOP/V but- V_.,._ET_
CANGUA_ I_GU_[
ton to point to "USER'S SET UP". z_o,_Tu,,
TIMESEARC_
Then, press the F.FWD_ button.
2
Select "ALL" or "BLANK"
Press the PLAY/. orSTOP/,, b, t- r .... , ...... 1
ton to point to REPEAT PLAY . |
Press the F.FWD/I_ or REW/_I ]" _,_,_
_,_i
button repeatedly until your desired _ '°'°"_T_"" .,_,_
selection [ALL] or [BLANK] [
appears.
3
Exit the Repeat Play setting
Press the MENU button on the remote control to
return to the TV mode.
4 Start playback
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY liP'"appears.
• Once you select the Repeat Play mode, it stays in
effect even after you turn off the T¥/¥CR.
• If the Rental mode is set [ON], the "RENTAL
PLAY I_" display has priority.
TO CA NCF.L THE REPF.AT PLA Y MODE
Repeat steps ill and [2], select [OFF] using the
EFWD/_ or REW/4 button on the remote control.
Press the MENU button on the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
- 22 - EN
9103