Special Playback; Rental Playback; Auto Repeat Playback; To Cancel The Rental Mode - Sylvania 6313CCB Owner's Manual

T5204/7204 w/BCV 01.1.29 6:52 PM
Make sure ...
•
TV/VCR power must be turned on.
•
Insert a prerecorded tape.
•
Before playback, follow steps below.

RENTAL PLAYBACK

This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
1
Select "USER'S SET UP"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "USER'S SET UP".
Then, press the F.FWD/B button.
2
Set "RENTAL" to [ON]
Press the PLAY/K or STOP/L but-
ton to point to "RENTAL".
Press the F.FWD/B or REW/s
button until [ON] appears.
3
Exit the Rental setting
Press the MENU button on the remote control to
return to the TV mode.
4
Start playback
Press the PLAY button to start playback. "RENTAL
PLAY B" appears.
•
Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.

TO CANCEL THE RENTAL MODE

Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button on the remote control.
Press the MENU button on the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
Page 22

SPECIAL PLAYBACK

AUTO REPEAT PLAYBACK

The TV/VCR has the auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAY button.
ALL REPEAT:
to the end of the tape.
BLANK REPEAT
ning to a blank part, which is blank for more than
10 seconds.
1
Select "USER'S SET UP"
Press the MENU button on the
– M E N U –
TIMER PROGRAMMING
remote control.
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
Press the PLAY/K or STOP/L but-
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
ton to point to "USER'S SET UP".
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
Then, press the F.FWD/B button.
2
Select "ALL" or "BLANK"
– USER'S SET UP –
Press the PLAY/K or STOP/L but-
B RENTAL [ON] ton to point to "REPEAT PLAY".
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
Press the F.FWD/B or REW/s
button repeatedly until your desired
selection [ALL] or [BLANK]
appears.
3
Exit the Repeat Play setting
Press the MENU button on the remote control to
return to the TV mode.
4
Start playback
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY B" appears.
•
Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
•
If the Rental mode is set [ON], the "RENTAL
PLAY B" display has priority.

TO CANCEL THE REPEAT PLAY MODE

Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button on the remote control.
Press the MENU button on the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
- 22 -
Repeat playback from the beginning
: Repeat playback from the begin-
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– USER'S SET UP –
RENTAL
B REPEAT PLAY
AUTO RETURN
– M E N U –
[OFF]
[ALL]
[OFF]
EN
9I03