Table of Contents
Advertisement
SPECIAL PLAYBACK
Make sure ...
• Use the remote control for this procedure.
• TV/VCR power must be turned on.
• Insert a prerecordedtape.
• Before playback, follow steps below.
This function enables you to improve the picture quality
when playing back worn cassettes such as rented tapes.
1 Select"USER'S
SET UP"
Press the MENU button.
Press the PLAY/A
or STOP/V
button to point to "USER'S SET
UP".
Then, press the F.FWD/II* button.
2
Sea"RENTAL"
to [ON]
Press the PLAY/A
or STOP/V
button to point to "RENTAL".
Press the EFWD/I_" or REW/4
button until [ON] appears.
**|4_
P
Exlt the Rents', settJn_
Press the MENU button to return to the TV mode.
4
Start playback
Press the PLAY button
to start playback. ''RENTAL
PLAYI_" appears.
• Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.
TO CA NCEL THE RENTAL
MODE
Repeat
steps
[I] and [2], select
[OFF] using
the
F.FWD/I_
or REW/4
button on the remote control.
Press the MENU button to return toTV mode.
If there is a power failure of any kind, the unit will
retain its memory for this feature.
The TV/VCR has the auto repeat function that allows
you to repeat a tape indefinitely
without touching the
PLAY button.
-
ALLREPEAT: R epeat playback from the beginning to
the end of the tape.
BLANKREPEAT: R epeat playback from the beginning
to a blank part, which is blank for more than 10
seconds.
1
Select "USER'S SET UP" I"
1
.MtNU.
Press the MENU button.
"_"_"--_
KWrI_
_
Pressthe PLAY/A
or STOP/V
_
button to point to "USER'S SET
_"_,_'_
UPj,
'ml f&asa'l
Then, press the F.FWD/I_
button.
2
Setect"ALL"
or"BLANK"
Press the PLAY/&. or STOP/T button to point to
Press the F.FW'D/I_ or REW/4
_ ,_,
._
i button repeatedly until your
desired
selection
[ALL]
or
BLANK] appears.
3 Exit the Repeat Play setting
Press the MENU button to return to the TV mode,
4_ Start playback
, Press the PLAY button to startthe Repeat Play.
"REPEAT PLAY I1_"appears.
• Once you select the Repeat Play mode, it stays in
effect even after you tam off the TV/VCR.
• If the Rental mode is set [ON], the "RENTAL
PLAYI_" display has priority.
TO CANCEL
THE REPEAT
PLA Y MODE
Repeat
steps
[11 and [2], select
[OFF] using
the
F.FWD/I_
or REW/_I
button on the remote control.
Press the MENU button to return to TV mode.
If there is a power failure of any kind, the unit will
retain its memory for this feature.
- 20 -
EN
8L15
T7008-03
Advertisement
Table of Contents
