Sylvania LD320SS8 Owner's Manual page 39

[] DVD Language Setting
You can change the desired language when playing back the disc,
1 Press [SETUP] to display the main menu.
Use [Cursor A/V] to select"DVD", then press [ENTER].
Or
V
Use [Cursor _1 / I_] to select" _ ", then press [ENTER].
Use [Cursor A/V] to select the desired item, then press
[ENTER],
OF
Use [Cursor A/V] to select the desired item, then press
[ENTER],
[AUDIO] "1, *2 (Default: ORIGINAL)
Select the desired audio language.
or
[SUBTITLE] "1, *2 (Default: OFF)
Select the desired subtitle language.
or
[DISC MENU] "1 (Default: ENGLISH)
Select the desired language in DVD menu.
or
No te_
• To change the on-screen language, call up "LANGUAGE"
from the main men u and set the desired language.
• (Refer to "Language Selection" on page 14.)
• Language options are not available with some discs.
• If"OTHER" is selected in "AUDIO" "SUBTITLE" or "DISC
MENU" menu, press &digit number to enter the code for
the desired language. (Refer to "Language Code Lis t" on
page 43.)
• Only the languages supported by the disc can be selected.
*2
• Language setting forAudio and Subtitle are not available
with some discs. Then press [AUDIO] and [SUBTITLE].
Details are on page 37.
• If the DVD's default settings for audio and subtitle are the
same language, the subtitles may not show unless you
turn them on.
Press [SETUP] to exit.
c_
EN