Sylvania LD320SS8 Owner's Manual page 27

O
[] Blue LED
Press [SETUP] to exit. Youcansetthe blueLED onthefront panelto light upwhenthe unitis
turnedonorwhena discisinserted.
1 Repeat steps 1 and 2 in "Closed Caption"on page 22.
Note:
• Adjust the "Phase" setting after the "Clock" setting has
been properly adjusted.
• Youmay not obtain an appropriate screen with auto
adjustment for some signals. In this case,adjust the
settings manually.
[] HDMI Audio
Youcanset themethod0fsoundinputfor the HDMIl-IN jack.
1 Repeat steps 1 and 2 in "Closed Caption"on page 22.
2 Use [Cursor A/V] to select "HDMI1 Audio", then press
[ENTER].
or
Use [Cursor A/r] to select the desired sound input,
then press [ENTER].
or
Use [Cursor A/r] to select "Blue LED", then press
[ENTER].
or
Use [Cursor A/r] to select the desired setting, then
press [ENTER].
or
Power on Lights up while the unit is turned
on.
Blue LED Disc in Lights up when a disc is inserted.
Lights off when there is no disc.
Off Turns offthe Blue LED.
Press [SETUP] to exit.
Select if you have connected both
digital device to the HDMI l-IN
Auto jack and analog device to the
audio sources. Digital audio input
signal will have priority.
HDMI1
Audio Select if you have connected
Digital digital device to the HDMI l-IN
jack for digital audio input signal.
Select if you have connected
Analog analog device to the analog audio
jacks for analog audio input signal.
Press [SETUP] to exit.
Z
c)
EN