Random Playback - Sylvania LD320SS8 Owner's Manual

©
[] Repeat A-B Playback [] Programmed Playback
!ill
You can repeat playback between A and B on a disc.
1 During playback, press [A-B] at your desired starting point (A).
AiD
J
2 Press [A-B] at your desired ending point (B).
f
• Point B should be in the same title or track as point A.
• Within a few seconds, the section A-B will begin to
play back repeatedly.
3 To cancel repeat A-B playback, press [A-B] repeatedly
until "_i OFF" appears.
No re:
• Repeat setting (except "ALL") will be deared when moving to
another title, chapter, track/file or folder.
• During programmedplayback, repeat setting will be
effective for the tracks/files in the program.
• Repeat playback or repeat A-B playback may not available
with some discs.
• Repeat A-B playback does not function during other repeat mode.
• To cancetpointA, press [CLEAR] atstep 1 in "RepeatA-B
Playbock'_
• Stopping playback will cancel repeat A-B playback.
[] Random Playback
This function s hufflestheplaying orderof tracks i nstead ofplayback inthesequence.
1 In stop mode, press [MODE] repeatedly untiI"RANDOM"
menu appears.
e.g,) audio CD
!'(}i}[{
Press [PLAY I1_] to start random playback.
....
No re:
• To repeat the current track/file in the random mode, follow
the steps 1 and 2 in "Repeat Playback" on page 34 and select
"TRACK':
• To repeat the entire random selections, follow the st_s 1
and 2 in "Repeat Playback" on page 34 and select" ALL':
• Random playback of MP3 or JPEG is not available while
"DUAL PLAYBACK" is "ON':
• Randomplaybackwi!lbekeptuntilyoupress[STOPII].
Youmay determine the orderin whichtracks will play back.
1 In stop mode, press [MODE] repeatedly until
"PROGRAM" menu appears.
e.g.) audio CD
M(}Uil
2
3
Use [Cursor • / Y] to select a desired track/file, then
press [ENTER] to store.
• Additional tracks/files may be on other screens. Use
[Cursor _1/I_] to go on to the next / previous pages.
• Repeat this step until you have selected all the tracks/
files you wish to play back in the program.
3
• Up to 99 tracks/files can be ordered.
• If 8 or more tracks/files were in a program, use
iiii_
[SKIP _ / I_1_1] to see all the tracks/files.
While an MP3 or a JPEG folder is open:
- Press [Cursor I_] when you want to go to the next
hierarchy.
- Press [Cursor _1] when you want to go back to the
previous hierarchy (except for the top hierarchy).
- Press [TITLE] when you want to go back to the item in
the top hierarchy.
Press [PLAY I1_] to start programmed playback.
Note:
• Press [CLEAR]to erasethe last track/file in the program if youmake an error.
• Toeraseallprogrammed tracks/filesatonce, select"ALLCLEAR"andpress
[ENTER[ at step 2,
• Whlleaprogramisbeingplayedback,[STOPm]worksasfollows:
- Pressing [STOPII[ once:The track/file will bein the resumestandby mode.
Next time youpress[PLAYI_], the playback will resumefrom the point
where it is stoppedin the programmed playback. (ForMP3 file, playbackwill
resumefrom the beginning of the current file.)
- Pressing [STOPII] twice: Resumemode will becanceled.Next time you
press[PLAYI_], playback will restart from the first track/file in the original
order,However, y our programmed playbackcan berestarted when you
follow the above steps.(Yourprograms are still storeduntil either the discis
ejectedor the unit is turned off)
On somediscs, [ STOPII] wlll not work while the resumemessage appears,
Please walt until the messagedisappears.
• Torepeat the current track/file in the program, follow the steps I and 2 in
"RepeatP/ayback"on page 34 and select"TR'ACK'f
• Torepeattheentireprogram, followthesteps I and2in "RepeatHayback"
on page 34and select"ALL'_
• Turningofftheunitorejectingthediscwifierasetheprogram.
• Youcannotuse[theNumberbuttons]toselectanothertrack/fi/eduring
programmed playback. Use[SKIP_ /1_ to selectother tracks/files in
the program.
• Youcannotcombinerandomplaybackwithprogrammedplayback.
• Youcannotalteraprogrammedorderdufingplayback.
• Youcanstartprogrammedplaybackonlywhllein "PROGRAM"menu.
EN