Table of Contents
Advertisement
Connections
When
you connect
the TV in this product,
see the following
instructions.
(INPUT)
(OUTPUT)
Audio cable
i (_)._(_._
Video cable
! ._v_
(supplied)
_-®
S-Video cable
(commercially
available)
I ::q
l L:i:;q
Audio cable
(supplied)
available)
Hint
......
_,,
_:, i _:_;;_
:_'i;_
;!_
_;
= Connect this DVD/CD player directly to the TV. If the Audio/Video cables are connected
to a VCR, pictures may be
distorted due to the copy protection
system.
,,You can use either the Video cable or the S-Video cable connection for Method 1.
,,The S-Video cable connection provides better image than the Video cable connection.
,,The Component Video cable connection provides the best image.
• When progressive scanning mode is selected, video signal will be output
from the COMPONENT VIDEO OUT jack
(AV-IN2) only.
After you have completed
connections
• You need to match the TV input mode with your connection. Press [TV], then press [INPUT SELECT] to select "VIDEO1"
for Method 1 and "VIDEO2" for Method 2. Remember
to press [TV] button first to operate TV with the remote control. For
further details, please refer to "REMOTE CONTROL OPERATION
FOR LCD TV" in QUICK GUIDE.
Input modes for common TV brands (Example)
Listed below are inputs for common brand name TV's.
Admiral:
AUX
Curtis Mathis:
LINE1, LINE2, 00, 90, 91, 92, 93
GE:
INPUT, TV/VCR, 00, 90, 91, 92, 93
Hitachi:
INPUT, AUX
JVC:
A/V CHANNEL, INPUT1, SVlDEO, INPUT2
Kenwood:
AUX
LXI-Series:
00
Magnavox:
AUX CHANNEL
Panasonic:
TV/VlDEO
RCA:
INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung:
TV/VlDEO
Sanyo:
VIDEO
Sharp:
00
Sony:
VIDEO1, VIDEO2, VIDEO3
Toshiba:
TV/GAME
Zenith:
00
if your
TV is compatible
with
525p
(480p)
progressive
scanning
and you want
to
enjoy
that hicLh__h quality
picture;
You must select the connection Method 2 above and progressive scanning mode. To set the mode, press and
hold [PLAY I_] on the front panel for more than 5 seconds, so that PROGRESSIVE indicator will light up.
if your
TV is not compatible
with
progressive
scanning;_
Use this DVD/CD player in interlace mode. Make sure that PROGRESSIVE
indicator is off. If not,
press and hold [PLAY I_] on this DVD/CD player for more than 5 seconds, so that PROGRESSIVE
indicator of this DVD/CD player will light off.
[This DVD/CD player]
o ,:lj
morethan 5 seconds
[Interlacemodel
[Progressivescanning mode]
-6-
EN
Advertisement
Table of Contents
