Table of Contents
Advertisement
reMote controL: batteries
When the LED on the remote control
flashes red and a message appears on
the screen, change the batteries in your
remote control
Hold the sides of the remote control
and press latch A on the back of the
device
The keypad lifts out from the back of
the device
note: take care not to drop the
keypad
Do not throw away your used batteries; give them to an organisation responsible
for collecting and recycling batteries
46
a
a
Place the batteries (type: AAA/LR3/
UM4 ( 5V)) in the remote control
Make sure you put the batteries in the
correct way round, as shown on the
remote control
Replace the battery cover and press
any button to switch on the remote con-
trol
Your remote control connects to your
navigation system automatically
note: if you do not use the remote
control for 20 seconds, it will switch to
power saving mode
If you do not use the remote control for
20 minutes, it switches off completely
Press any button to switch your remote
control on
Advertisement
Table of Contents
