Using The Sabbath Switch; Parts Included; Tools And Materials Needed - Monogram ZSAB1 Installation Instructions Manual

USING THE SABBATH SWITCH

• To activate the Sabbath Mode feature, raise the top
grille panel and set the Sabbath Mode switch to the
ON position.
• When the refrigerator is in Sabbath mode, a green LED
light will be visible.
On Side-by-Side Refrigerators, the green light
will be visible between the top grille panel and the
refrigerator door.
On Bottom-Freezer Refrigerators, the green light may
not be visible with the top grille panel closed. If you are
not sure if the unit is in Sabbath Mode, raise the grille
panel to see if the green light is on.

PARTS INCLUDED

Sabbath
Switchbox

TOOLS AND MATERIALS NEEDED

Stepladder or
Introduction
4 Wire Ties
Stool
2 Self-Piercing
Screws
Phillips head
screwdriver
4
On/Off LED
TECHNICAL
DATA
Sabbath Mode Product Kit Technical
Data Sheet (Place with refrigerator's
Technical Data Sheet for future use)