Programming For Aux - GE RM94925 Instruction Manual

94925 Revised Size 2/25/02
Programming For Second Device
If you have not programmed the AUDIO•AUX button
for audio components, you can assign a second TV,
DVD, CD player, VCR, Satellite System, or Cable Box
to it.
1. Manually turn on the
device you wish to con-
trol. Find the three digit
code for the device you
wish to program in the
code list.
2. Press and hold the
CODE SEARCH button
until the INDICATOR
LIGHT lights, then release
the CODESEARCH but-
ton.
3. Press and release the
AUX button (The INDI-
CATOR LIGHT will blink
then remain lit.)
4. Enter the code using
the Number Buttons. After
your code is entered, the
INDICATOR
LIGHT will turn off. If the
code is not valid, the
INDICATOR LIGHT will
blink. Check the code list
and repeat process.
5. Aim the remote at the
device you wish to control
and press the ON•OFF
button. The device should
turn off.
6. With your device on,
press CHAN+ (CHAN-
NELUP) or ON•OFF but-
ton. If the device
responds, no further pro-
gramming is required.
NOTE: If your device does not respond, try all the
codes for your brand. If the codes do not work,
or your brand is not listed, try the Code Search
method on page 16.
7. Enter your code and the type of device you
programmed here for easy reference.
4:00 PM Page 12
11