Advertisement
ASSEMBLY
Assembly requires two persons.
Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires
a Phillips screwdriver
_--_,
two adjustable
wrenches
_,
and pliers
_.
Use the drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST on page 14. The second number is the quantity
needed for assembly. Note: Some small parts may have been pre-attached.
If a part is not in the parts
bag, check to see if it has been pre-assembled.
M4 x 5mm
Self-tapping
M4 x 8mm
M4 Washer
M6 Washer
M8 Split
M8 Washer
Screw (66)-2
Screw (29)-2
(70)-2
(68)-8
Washer (42)-3
(54)-4
M6 Curved
M6 Nylon
M8 Nylon
M10 Nylon
Washer (69)-4
Locknut (63)-4
Locknut (10)-2
Locknut (65)-2
M6 x 30mm Button
Bolt (64)-4
M6 x 35mm Button
Screw (61)-8
M6 x 15mm Button
Screw (46)-4
M8 x 20mm Button
Screw (34)-3
MIO x 75mm Carriage Bolt (30)-2
MIO x 60mm Button Screw (33)-2
M8 x 125mm Bolt (62)-2
Advertisement
