Status And Error Messages - Epson B 310N User Manual

❏ The password is limited to 8 characters.
❏ Alphanumeric characters are available for the password.
❏ If you forget the password, contact Epson support.
& See "Epson Technical Support" on page 164.
Lock Setting
You can lock the LCD panel to make it childproof, or to prevent unexpected changes made
by using the LCD panel.
When Ready apears after you set this function On, you need to enter the password when
you press the r Right button to enter the Menu mode .

Status and Error Messages

This section describes the meaning of messages displayed on the LCD screen.
The table below describes the status messages.
Message
Cancel
Charging ink
Cleaning
Please wait
Printing
Ready
Power save
Power off
The table below contains error messages, a brief description of each message and
suggestions for correcting the problem.
Message
Service call see guide
Description
The print job is canceled.
The printer is charging the ink.
The printer is cleaning the print head.
The printer is starting.
The printer is initializing the settings.
The printer is processing data.
The printer is ready to print.
The printer is in the power save mode.
The printer is shutting down.
Problem
Service call error occurs.
Solutions
Turn off the printer and then back
on. If the error does not clear,
contact Epson.
& See "Where To Get Help" on
page 164.
Using the Control Panel
107