Removing the Mainboard
1. Perform the
"Removing the Lower
2. Perform the
"Removing the Battery
3. Perform the
"Removing the Left and Right
4. Perform the
"Removing the RTC
5. Perform the
"Removing the Hold Sensor
6. Perform the
"Removing the M-SATA
7. Perform the
"Removing the Small
8. Perform the
"Removing the Big
9. Perform the
"Removing the Touchpad
10. Perform the
"Removing the EL Small
11. Release the connector latch (1) from the mainboard, then disconnect the LED indicator
cable (2).
Figure 3-39. LED Indicator Cable
Machine Maintenance
Case" procedure described on page 3-7.
Pack" procedure described on page 3-8.
Speakers" procedure described on page 3-10.
Battery" procedure described on page 3-12.
Board" procedure described on page 3-13.
Board" procedure described on page 3-15.
Fan" procedure described on page 3-17.
Fan" procedure described on page 3-19.
Module" procedure described on page 3-22.
Board" procedure described on page 3-25.
0
3-27