Table of Contents
Advertisement
Using the Flash
The following describes various flash settings you can make
to suit the type of image you are trying to record.
1.
In a recording mode,
press
to cycle
through the flash mode
settings until the one
you want is indicated
on the monitor screen.
Flash mode
indicator
• Each press of
cycles through the available flash
modes described below.
RECORDING IMAGES
(Flash/Nine Image)
48
To do this:
Have the flash fire automatically
when required (Auto Flash)
Always fire the flash (Flash On)
Turn off the flash (Flash Off)
Select this setting:
No display
Advertisement
Table of Contents
