Casio Exilim EX-S12 User Manual page 69

images cannot be
transferred over a
USB c onnection.
Language selection
screen appears
when the camera is
turned on.
The t ime a nd date
settings configured
the first time a fter
purchasing the
camera are reset to
their factory
defaults when
remove the
camera's battery.
1 )The U SB c able may n ot b e connected securely. Check all
connections.
2)The wrong USB communication protocol isselected. Select
the correct USB communication protocol inaccordance with
the type o fdevice you are connecting (pages 125, 134).
3)If t he camera isnot turned on, turn i ton.
4)Your computer may n ot b e able t orecognize the camera if
you connect via aUSB h ub. Always connect directly tothe
computer's USB p ort.
1 )You d id not c onfigure initial settings after purchasing the
camera orthe battery may have been l eft w ith a dead b attery.
Check the camera setup (pages 19, 157).
2)There may b e aproblem with the camera's memory data. If
this isthe case, perform the reset operation toinitialize the
camera's setup (page 161 ).After that, configure each setting.
ifthe language selection screen does not re-appear when you
turn t he camera on, i tmeans that the camera's memory
management data h as b een r estored.
ifthe same message appears after you turn p ower back on,
contact your retailer oraCASIO authorized service center.
Load the camera's battery and reconfigure the time a nd date
settings (page 19). Do not r emove the battery from the camera
for a tleast 24 hours after configuring time a nd d ate s ettings.
After that, the settings will n ot b e reset ifyou remove the
battery.
• Ifthe time a nd d ate a re reset totheir factory default settings
when you remove the battery after ithas been loaded for
more than 2 4 hours, itcould mean that the camera's setting
memory isdefective. Contact your retailer oraCASIO
authorized service center.
B 184 Appendix