Casio Exilim EX-S12 User Manual page 3

You can connect the camera directly toaprinter that supports PictBridge and print
images without going t hrough acomputer.
• To set up the camera before connecting to a printer
1. Turn on the camera and press [MENU].
2.
On the "Set Up" tab, select "USB" and then press [,].
3. Use [A] and [V] to select "PTP (PictBridge)", and then press [SET].
• Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the
camera to connect the
camera to your printer's
USB port.
• The camera does not
draw power over the
USB cable. Make sure
the camera's battery is
sufficiently charged
before connecting.
• Make sure that you
insert the cable
connector into the USB/
AV port until you feel it
click securely into place.
Failure to insert the
connector fully can result
in poor communication
or malfunction.
USB cable
Large connector
USB/AV port
USB port
i--
Making sure that the • mark on
the camera is aligned with the •
mark of the USB cable connector,
connect the cable to the camera.
Small connector
• Note that even while the connector is fully inserted, you still
will be able to see the metal part of the connector as shown
in the illustration.
• When connecting the USB cable to a USB port, make sure
you align the connector correctly with the port.
118 Printing