Mode Control - GE Zoneline 3200 Owner's Manual

The
controls
on your
Zoneline
1
Temp Control
The temp control is used to maintain the
room temperature. The compressor will cycle
on and off to keep the room at the same level
of comfort. When you turn the knob to COOLER
(blue) the indoor air will become cooler. Turn
the knob to WARMER (red) and the indoor air
will become warmer.
3200 Series only
When the outdoor temperature is lower than
25 F., heat is provided by the electric heater in
the air conditioner instead of by the heat pump.
4
Operating Instructions
TEMP CONTROLS
1
2

Mode Control

HIGH COOL and LOW COOL provide cooling with
different fan speeds.
HIGH HEAT and LOW HEAT provide heating with
different fan speeds.
LOW FAN or HIGH FAN provides air circulation
and filtering without cooling or heating.
NOTE:
If you move the switch from a cool or heat
setting to STOP or to a fan setting, the unit has
an automatic 3-minute delay before allowing the
compressor to restart in the cool or heat mode.
MODE CONTROLS
LOW
FAN
STOP
LOW
HEAT
HIGH
HEAT
2
HIGH
FAN
LOW
COOL
HIGH
COOL