GE Zoneline 3200 Owner's Manual page 18

Installation Instructions
Remote Control/Wall Thermostat (Class 2)
To operate the Remote Control/Wall
Thermostat (Class 2) switch #3, you must use
an Optional Interface Module kit. See the
Installation Instructions with accessory kit
RAK0IM.
Central Desk Control (Load Shedding)
To operate Central Desk Control (CDC),
switch #5, you must have an Optional Interface
Module kit. See the Installation Instructions with
accessory kit RAK0IM.
All-Time Low Fan
Switch #4 controls the All-Time Low Fan and is
only effective with a Remote Control Thermostat.
This function causes the indoor fan to operate at
low speed. If the switch is DOWN (off) the fan will
run in high speed. If the switch is UP (on) the fan
will run in low speed.
18
1 2 3 4 5 6
UP
DOWN
Auxiliary Controls
1 2 3 4 5 6
UP
DOWN
1 2 3 4 5 6
UP
DOWN