Shooting A Snapshot - Casio Exilim EX-Z1080 User Manual

I Using Edit Family to Assign a Priority Level
to Recorded Face Data
After recordingface data, you can assign a nameand a priority
levelthat controlshow the data is
applied when
shootinga
snapshot.
1. In the REC mode, press [SET].
2.
Use [A] and [V] to select the third option from
the top in the operation panel (Face
Recognition).
3.
Use [,q] and [1_] to
select "_ Edit
Family" and then press
[SET].
This display the face data
editing screen.
4. Use [A], [V], [_], and [1_] to select the face
data you want to edit, and then press [SET].
5. Use [_1] and [1_] to select a name, and then
press [V].
• You can select any one of 12 preset narnes to face data
6. Use [_] and [1_] to select the priority level you
want and then press [SET].
• You can select any
one
of four levels, from " • • -k "
(Lowest) to " "_ "k "k " (Highest). Selecting "- '* o"
(Disabled) will disable face recognition.
Deleting recorded face data
Perform the following steps when you want to delete recorded
face data.
°
2.
.
In the REC mode, press [SET].
Use [A] and [V] to select the third option from
the top in the operation panel (Face
Recognition).
Use [_1] and [,] to select "_ Edit Family"
and then press [SET].
4. Press [MENU].
SHOOTING A SNAPSHOT
86